دراسة الحد من اقتناء السيارات في دول مجلس التعاون — الصفحة ٨٢

i Level of service C is still a zone of stable flow but at hthis volume and density level most drivers are becoming restricted in their freedom to select speed, change lanes, or pass. Operating speeds are still in the range of 2/3 to 3/4 of maximum; density is from 30 to 35 vehicles per lane mile on freeways (19 to 22 vehicles per lane kilometer). This service level is frequently selected as being an appropriate criterion for design purposes, particularly for urban freeways where the cost of providing the higher sercvice levels during peak periods may be prohibitive (see Figure 8.5) Level of service D approaches unstable flow.To lerable average operating speeds are maintained but are subject to considerable and sudden variation. Freedom to maneuver and driving comfort are low because lane density has increased to between 45 and 50 vpm (28 and 31 vpk), and the probability of accidents has increased. Most drivers would probably consider this service level unsatisfactory (See Figure 8.6). The upper limit of level of service E is the capacity of the facility.Operation in this zone is unstable,speeds and flow rates fluctuate, and there is little independence of speed selection or maneuver. Since headways are short and operating speeds subject to rapid fluctuation, driving comfort is low and accident potential high. Although circumstances may make operation of facilities under these conditions necessay,it is clearly undesirabe and should be avoided whinever feasible (see Figure 8.7). Level of service F describes forced flow operations after density has exceeded optimum which is normally in the range of 70 to 75 upm (43 to 47 vpk) on free flowing facilities. Speed and rate of flow are below the levels attained in zone E and my, for short time periods, drop to zero, Figure 8.8 shows, pictorially, the operating conditions on a typical freeway under service volumes associated with the level of service F. -AY-
ص ٨٢

النص مستخرج آليًّا من صور الكتاب، وقد يقع فيه خطأ.