ملخصات البحوث المدعمة المنتهية العلوم الهندسية — الصفحة ٢٦١

Influence of Sand and Dust Particles on The Breakdown Characteristics of Air Gaps Project No.: ARP-9-33 P. I. Co. I. Inst. Budget Duration : Dr. A. A. Al-Arainy : Dr. N. H. Malik, and Eng. M. I. Qureshi : College of Engineering, King Saud University : SR. 610,000 : 36 Months The project presents the results of experimental investigations carried out to determine the influence of sand/dust particles on the breakdown voltage and on the breakdown time characteristics of air gaps. An envi- ronmental chamber was especially designed and built for this purpose. In addition to 60 Hz voltage, lightning and switching impulses of standard waveforms were used for these measurements. Rod-plane, rod-rod, sphere-plane and sphere-sphere electrode configurations were used. Gap spacings varying from 5 cm up to 2m and maximum applied voltage of up to 200 kV(rms) AC, + 1000 kV peak lightning impulses and + 850 kV peak switching impulses were used for the investigations. The measure- ments were carried out for clean air as well as for simulated sand/dust storm conditions. Additional measurements were carried out using clean air but sand/dust polluted electrodes. For some configurations, effect of artificial ultraviolet irradiation was also examined. The results showed that the presence of sand and/or dust particles in the air gap and/or on the electrodes could significantly influence the breakdown voltage and breakdown time characteristics of different types of gaps. Most of the pollution related effects were caused by particles which settled on the electrodes and the particles present in the interelec- trode gap had little influence on the breakdown characteristics. Detailed experimental observations and complete analysis of the re- sults was highlighted by examining the impact of sand/dust pollution on the design clearances of overhead power transmission and distribution lines, on the performance of protective gaps used for insulation coordina- tion, and on the accuracy of high voltage measurements carried out in pol- luted environment by use of sphere gaps. Practical steps were suggested to minimize the influence of desert pollution on the performance of protective and measurement gaps. 97
الجزء 2 — ص ٩٧

النص مستخرج آليًّا من صور الكتاب، وقد يقع فيه خطأ.