Chemical Investigations into Sulphur Utilization
Project No. : ARP-2-28
P. I.
Co. I.
Inst.
Budget
: Dr. G. J. Courval
: Dr. M.Z. El-Faer, Dr. J. K. Lusty, Dr. W. J. Peeling
: College of Science, King Fahd University of Petroleum and Minerals
: SR. 921,250 Duration : 24 Months
Chemical investigations were carried out on two main products utilizing sulphur, namely, sulphur asphalts and sulphur infiltrated concretes.
The results showed that under the conditions normally encountered in preparing sulphur asphalt (SA) blends, i.e. temperature of 140-150° C, 10- 50% sulphur, no reaction between sulphur and asphalt molecules takes place. Studies on model compounds indicate that alkenes do react with sulphur under these conditions. Thus asphalts containing alkenes may be expected to undergo reaction with sulphur. Studies on the mechanical properties of sulphur asphalt blends using the sliding plate rheometer showed that the same increase in stiffness of a SA blend relative to asphalt was obtained regardless of any chemical reactivity that occurs between sulphur and asphalt. The increase in mechanical strength of SA blends de- pends upon the level of added sulphur. Sulphur acts as a supporting filler and the mechanical properties of the SA blend are governed by the proper- ties of the asphalt. The sulphur in a SA blend exists in the form of a disper- sion of crystals of sulphur. The degree of dispersion, determined by light microscopy, depends upon the level of added sulphur and changes with time. The degree of restructuring that takes place depends upon the viscos- ity of the SA blend and the presence of void space in the blend.
Sulphur infiltrated concretes (SIC) when immersed in aqueous media decompose rapidly with disintegration of the concrete blocks. The pres- ence of a yellow colour formed in aqueous solutions containing SIC blocks was found to be due to the presence of thionates. These thionates decom- posed to yield sulphate and sulphite. Approximately 50% of the sulphur in SIC's reacted in aqueous media to yield decomposition products.These re- actions occur in acidic, basic and saltic aqueous solutions.
3
الكتاب — ص ٦٦