ملخصات البحوث المدعمة المنتهية العلوم الاساس — الصفحة ٥٢

Effects of Reduction Conditions on The Properties of Project No. P. I. Co. I. Inst. Budget Duration Supported Nickel Catalysts : ARP-9-64 : Dr. Y.D. Yeboah : Dr. A.G. Maadhah, Dr. M.A. Al-Saleh and Dr. M.A. Shalabi : Research Institute, King Fahd Univeristy of Petroleum and Minerals : SR.452,000 : 24 Months The specific objectives of this study were to determine the reduced cat- alyst properties, to establish the relative importance of the process vari- ables on the reduction and to provide optimum guidelines for reduction of the catalysts. The main process variables were temperature, duration, heat- ing rate, reducing gas composition, gas space velocity and nickel loading. The catalyst properties were surface area, thermal behaviour, topography, composition and crystalline structure. The results showed that temperature is the most important factor with re- spect to extent of reduction and specific surface area for nickel - alumina catalysts. For steam reforming catalysts increasing temperature resulted in a maximum surface area at about 400 °C. Increasing temperature upto 500 OC resulted in a monotonic increase in the active surface area of methana- tion catalysts. Duration and space velocity also affected the extent of reduc- tion. Heat rate, duration and space velocity were found to be important in determining active surface area of the catalyst. Increasing of heating rate had no effect on the extent of reduction but decreased the active surface area of steam reforming and methanation catalysts. The reduced steam reform- ing catalysts were thermally stable, with exothermic peak and gain weight due to oxidation of metallic nickel. The reduced methanation catalysts ex- hibited 2 endothermic effects, weight loss and exothermic effect with weight gain at (200-400 °C). The X-ray photoelectron spectroscopy was performed on the surface of reduced commercial catalysts A dominant oxidation state of nickel at the surface of the reduced commercial catalyst was shown to be. that of metallic nickel. Guide lines for the reduction of commercial steam reforming and methanation catalysts are presented. The project determined the reduced catalyst properties and established the relative importance of the reduction parameters. 25
الكتاب — ص ٤٤

النص مستخرج آليًّا من صور الكتاب، وقد يقع فيه خطأ.