السجل العلمي للندوة العالمية لاستخدام تكنولوجيا الاشعاعات المؤينة 01-02 — الصفحة ١٠٠٧

Production of Fission Molybdenum on a Technical Scale at ... 959 carrier material, sodium sulfite and sulfuric acid are added to the alkaline solution containing the molybdenum after the insoluble residue has been filtered. Addition of potassium iodide accelerates the precipitation of tellurium. After filtration of the tellurium precipitate through a glass wool filter the molybdenum present as the rhodano complex of trivalent and tetravalent molybdenum is fixed on a Chelex-100 column 14,5/. Chelex-100 is an ionexchanger with functional nitrilodiacetate groups. It has the property to act as an anion exchanger in highly acidic media and as a cation exchanger in basic media. Its property of acting as an anion-exchanger allows quantitative molybdenum sorption in form of a complex carrying a negative charge. After the column filled with 2M rhodanide and sulfite solution containing sulfuric acid has been washed with pure 2M sulfuric acid and with water, complete elution is carried out by using 1M sodium hydroxide solution. By applying Chelex- 100 columns it is possible for the first time to exploit the extremely specific reaction of trivalent and tetravalent molybdenum with rhodanide ions. These anionic species can also be fixed quantitatively on common anionic exchangers, but contrary to the Chelex-100 system, quantitative molybdenum elution is not feasible under practical conditions. The molybdenum elution with sodium hydroxide solution from the Chelex-100 system is exclusively due to the change in the exchange behaviour caused by the medium, namely the transformation of an anion into a cation exchanger and, hence, the repulsion of the negatively charged MoO4 ions present under these conditions. The eluted molybdenum is acidified to approximately pH 2 by addition of nitric acid and the molybdenum is adsorbed on an aluminium oxide column /6/ in order to eliminate corrosion products and traces of tellurium and iodine. The column is washed with 0.01M nitric acid, water and 0.01M ammonium hydroxide. Molybdenum elution takes place with 1M ammonium hydroxide. The ammonia solution containing molybdenum is evaporated to dryness and in order to eliminate trace amounts of organic substances the molybdenum is sublimed from a platinum crucible in a quartz vessel at about 850 °C. The sublimed MoO3 is dissolved in ammonia. After evaporation of the ammonia, sodium hydroxide solution (analytical grade) is added to the solution. Depending on the requirements, sodium hypochlorite may be added to the solution in order to stabilize the molybdenum.
الكتاب — ص ٩٥٩

النص مستخرج آليًّا من صور الكتاب، وقد يقع فيه خطأ.