السجل العلمي لندوة المشاكل الجيوتكنيكية في المملكة 01-02 — الصفحة ٢٦١

244 Iyad A. Ruwaih and Abdulaziz Khandker width of about 8 to 10 kilometers. However it is difficult to estimate the total thickness due to the disturbed nature of the Arabs (Powers et al 1966). Arab formation shows four cycles of deposition, alternating in lithology from carbonate to thin layers of anhydrite including the comfortable beds of Hith anhydrite on top of Arabs. Generally it is noted that the maximum anhydrite development, with subsequent dissolu- tion, occured along a North-South line near Riyadh, Steineke, et al (1958) and Powers, et al (1966). Intense slumping and fracturing (brecciation) are specially predominant in the Arab formation and are also commonly noted in Jubaila forma- tion. This phenomenon can be attributed to the removal of anhydrite alternate interlayers in the form of solutions, causing the collapse of limestone structure, developing innumerable fractures and ultimately forming collapse breccia. Sulaiy Formation: It overlays the Arab formation with Hith Anhydrite beds in between. It is exposed to the North-East and East, approximately 10 to 15 kilometers from Riyadh. In Riyadh Sulaiy formation appears as chalky, massi- vely bedded aphanitic limestone hills overlying in an irregular pattern the collapsed breccia of the Arab formation. FIELD INVESTIGATION Comprehensive subsurface investigation has been carried out for numerous sites all over the city of Riyadh. Some of these sites are shown in Figure (1). It can be noted from the figure that the investigations are concentrated in areas where large development is being carried out. The field work included borehole drillings, excava- tion of test pits and field testing. Test pits were excava-
الكتاب — ص ٢٤٣

النص مستخرج آليًّا من صور الكتاب، وقد يقع فيه خطأ.