مستخلصات رسائل السعوديين لدرجة الدكتوراة — الصفحة ٥٧١

Technology 417 single beam supporting either simply-supported or fixed-ended slabs. Flow charts were developed to explain the method. The bilinear problem was solved after deriving a basic transfer matrix to re- late structural actions at the right end of a straight segment of beam to those at the left end. The solutions involve simultaneous transcendental equations in terms to unknown lengths of elastic and inelastic segments of beam. These were solved numerically by the Newton-Raphson method using an electronic com- puter. The elastic-perfectly plastic problem was also solved using transfer matrices, and it gave direct solutions for collapse loads. 281 Nazer, Mansour Othman, Thermal performance of a building and two flat plate collector systems. Co- lorado State University, 1978. 264 p. A study of the thermal performance of a 71.3 square meter (768 square feet) liquid coolant collector, and a 67.1 square meter (722 square feet) air coolant collector was performaed from thermal performance data that were measured and recorded for each system. The liquid collector is found to operate at 28.3% average efficiency (based on all-day calculated efficiency), and the air collector is found to operate at 32.5% efficiency. The actual performance of the two collector systems was compaired against perdicted performance calculated from the Energy Equation Model which is based on the Hottel-whillier-Bliss equations, and the results indicate that the actual performance is lower than the prediction by 32% for the liquid collector and lower by 27% for the air collector. Ambient air leaking into the air collec- tor, high top and side walls losses and low values for the effective product of transmittance times absorptance for the liquid collector are possible reasons for the discrepancies between the actual performance and prediction from the model. A <<Heuristic Descriptive Polynomianl»> was developed and shown to be an effective tool to simulate the thermal performance of the liquid collector. The advantage of this model lies in the simplicity of its equations and the small number of computations involved, which makes it suitable for system controls with the aid of microcomputers.
ص ٥٧١

النص مستخرج آليًّا من صور الكتاب، وقد يقع فيه خطأ.