Technology
409
The results have also pointed out the fallacy of using the average pore size, or the absorption, or both, as the sole parameters to indicate the behavior of a par- ticular rock sample relative to another. While it is true that the average pore size reflects the overall fineness of the pores, it is speciafically the smaller pores which intensify preesures developed in the pore space, and which should, therefore, be measured separately.
It has been generally accepted that torks having higher absorption will un- dergo a higher volume change when subjected to freezing. However, the re- sults of this study indicate that this is not necessarily the case. Rather, whther a rock sample will undergo a large volume change of the depends on a combina- tion of absorption and pore size distribution.
On two rock samples hich undergo the same volume change, one may attain that change gradually while the other changes volume suddenly. The latter is certainly more destructive than the former. This difference in behavior is, as- suming other factors are canal, a function of pore size distribution.
Recommendations
On the basis of the results of this study, it is beleived that a study in a similar vein but wider in scope is needed as the next step for designing optimal testing procedures to evaluate rock frest immunity. A wider range of rock samples both in composition and porosity, should be employed. The question of ther- mal conductivity should be investigated well, in order to determine the actual temperatures in the pore space.
Appropriate equipment should be developed before undertaking such a study. The mercury poresimeter should be adjusted for the influence of ther- mal instability in its pressure chamber. The method for measuring and calculat- ing pore size distribution should be revised to incorporate a means to evaluate the presence of
276 Dakhil, Fahd Hamid,
Concrete cover requirements for bridge decks. The Pennsylvania State University - Department of Civil Engineering, 1973. 104 p. diagrams.
Concrete bridge deck deterioration has been one of the most frequently ob- served problem in the highway industry. According to a 1955 survey of prob- lems faced by bridge maintenance engineers, concrete deterioration was cited
ص ٥٦٣